Powder Coating with High Quality of RAL Color
Delivery term:The date of payment from buyers deliver within days-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Beijing
-
Validity to:
Long-term effective
-
Last update:
2017-12-02 14:21
-
Browse the number:
94
+
Yangzhou Senyida Coating Equipment Manufacturing Co., Ltd.
- Contactaixin:
Contactaixin:
senyidacoating(Ms.)
- telephone:
-
Area:
Beijing
Address:No. 36 Huayang Industry Park, Xiaoji Town, Jiangdu Dist, Yangzhou, Jiangsu, China (225242)
- Website:
+
Model Number: SYD-0025
Brand Name: senyida
Key Specifications/Special Features:
1. Generalintroduction: Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion, crushed and sieved. The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.2. Features: 1). The products are nontoxic, solvent-free and nontoxic volatile substances, there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws.2). Raw material utilization is high, the highest utilization rate even more than 99%.3). After being pre-coated handle, disposable construction, without primer, you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs.4). Dense coating adhesion, good impact strength and toughness, high coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties.5). Powder coatings storage and transport are safety and convenience.
3. Productseries:
The products include high light (above 86%), glazed (76%-85%), matte (20%-50%), low light (below 20%). We also offer a variety of shiny products according to the needs of users.
4. Powderphysicalproperties:
Proportion: 1.2-1.8 (depending on the color and gloss).
Particle size distribution: 100% less than 125 microns (more than 85% between 60 to 90).
Liquidity (180°C): 22-35mm.
Curing conditions: 200°C, 10 minutes.
5. Averagecoverage:
8-10m/kg, the membrane is 60μm (calculate by 100% utilization rate of powder coating).
6. Packing:
Carton package, lined with double polyethylene bag, net weight 20kg.
7. Storagerequirements:
Store below 30°C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.
3. Productseries:
The products include high light (above 86%), glazed (76%-85%), matte (20%-50%), low light (below 20%). We also offer a variety of shiny products according to the needs of users.
4. Powderphysicalproperties:
Proportion: 1.2-1.8 (depending on the color and gloss).
Particle size distribution: 100% less than 125 microns (more than 85% between 60 to 90).
Liquidity (180°C): 22-35mm.
Curing conditions: 200°C, 10 minutes.
5. Averagecoverage:
8-10m/kg, the membrane is 60μm (calculate by 100% utilization rate of powder coating).
6. Packing:
Carton package, lined with double polyethylene bag, net weight 20kg.
7. Storagerequirements:
Store below 30°C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.
Coatingperformance | ||||
Testitems | Inspectionstandards | Testindicators | ||
Highlight | Glazed/Matte/Lowlight | |||
Impactresistance | ISO6272 | GB/T1732-1993 | 50kg/cm | 40kg/cm |
Cuppingtest | ISO1520 | GB/T9753-1988 | 8mm | 7mm |
Theadhesion(gridmethod) | ISO2409 | GB/T9286-1998 | 0 | |
Bending | ISO1519 | GB/T6742-1986 | 2mm | 3mm |
PencilHardness | ASTMD3363 | GB/T6739-1996 | 1H-2H | |
Saltspraytest | ISO7253 | GB/T1771-1991 | >500hours |
|
Dampheattest | ISO6270 | GB/T1740-1979 | >1000hours |
|
Heatresistance | 110°C/24hours(white) | Goodglossretention,E≤0.3-0.4 |
||
Floridaweatheringexposure | ISO2810 | South45°,12mons | Glossretention≥50% |
|
Artificialacceleratedaging | 60°C/8hours+50°C/4hourscondensing, cyclefor500hours | Glossretention≥50%Colorstability:E≤0.35 | ||
Annotate: | 1. The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns. | |||
2. Theabovecoatingperformancemaybelowerasshinyandslightlylower. |
Shipping Information:
- FOB Port: Shanghai
- Lead Time: 15 - 30 days
- Dimensions per Unit: 85 × 68 × 70 Centimeters
- Weight per Unit: 205 Kilograms
- Units per Export Carton: 20
- Export Carton Dimensions L/W/H: 38 × 27.5 × 29.5 Centimeters
- Export Carton Weight: 80 Grams
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- North America